Exploration of the Maximum Shrinkage Width of Heat Shrinking Machine

First, the power supply voltage of Heat Shrinking Machine is 380V 50HZ three-phase four-wire + grounding. The main controller uses Panasonic PLC of Japan, the inverter is provided by Hpmont of China, and the main control touch screen interface is supplied by MCGS brand of China. These configurations ensure the stability and reliability of the machine during operation.

In terms of shrinkage capacity, the maximum shrinkage width of the Heat Shrinking Machine reaches 500 mm. This data shows that the Heat Shrinking Machine can handle packaging with a width of no more than 500 mm, so that it can achieve a tight fit after the heating and cooling process.

In terms of shrinkage materials, Heat Shrinking Machine is suitable for POF materials with a thickness range of 0.015-0.025 mm. POF film has become the preferred material in the field of heat shrink packaging with its good transparency, toughness, environmental protection and shrinkage performance. At the same time, the length of the shrinkage material is also within the applicable range of the machine, that is, 145-175 mm.

In terms of production speed, the Heat Shrinking Machine has achieved an efficient production capacity of 10-30 rolls/minute. This speed not only meets the needs of large-scale production, but also ensures the continuity and stability of the packaging process. At the same time, the outer diameter of the finished roll ranges from 30-45 mm, the inner diameter of the parent roll is 76 mm, and the outer diameter is 300 mm.

In addition, the Heat Shrinking Machine also requires a certain air pressure supply, which ranges from 0.5-0.8Mpa. The stability of the air pressure supply is crucial to the normal operation of the machine, which ensures that the shrink film can fit tightly on the packaging to achieve the ideal shrinking effect.

In terms of the physical size and weight of the machine, the size of the Heat Shrinking Machine is 2100 x 1200 x 1600 mm and the weight is 1.6 tons. This huge size and weight not only reflects the complex structure and powerful functions inside the machine, but also puts forward certain requirements for its installation and use environment. Therefore, when selecting and using the Heat Shrinking Machine, it is necessary to fully consider the impact of its physical size and weight on the production site.